U.S. Department of Commerce, U.S. Census Bureau, Geography Division 2010 scTract10 2010 vector digital data withheld scTract10 The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area. In order for others to use the information in the Census MAF/TIGER database in a geographic information system (GIS) or for other geographic applications, the Census Bureau releases to the public extracts of the database in the form of TIGER/Line Shapefiles. en 201001 201007 publication date Complete TIGER/Line Shapefiles are extracted from the Census MAF/TIGER database. No changes or updates will be made to this version of the TIGER/Line Shapefiles. Future releases of TIGER/Line Shapefiles will reflect updates made to the Census MAF/TIGER database. -97.810242 -97.145342 37.918402 37.468483 1512498.646866 1703120.255451 1607114.759080 1768863.293522 ISO 19115 Topic Categories society None State or equivalent entity Polygon Census Tract Tract INCITS.38-200x (R2004),INCITS.31-200x (R2007),INCITS.454-200x,INCITS 455-200x,INCITS 446-2008 United States U.S. State or Equivalent Entity Kansas KS Sedgwick County Wichita None The TIGER/Line Shapefile products are not copyrighted however TIGER/Line and Census TIGER are registered trademarks of the U.S. Census Bureau. These products are free to use in a product or publication, however acknowledgement must be given to the U.S. Census Bureau as the source. The boundary information in the TIGER/Line Shapefiles are for statistical data collection and tabulation purposes only; their depiction and designation for statistical purposes does not constitute a determination of jurisdictional authority or rights of ownership or entitlement and they are not legal land descriptions.Coordinates in the TIGER/Line shapefiles have six implied decimal places, but the positional accuracy of these coordinates is not as great as the six decimal places suggest. U.S. Department of Commerce, U.S. Census Bureau, Geography Division, Geographic Products Branch Mailing address
4600 Silver Hill Road, Stop 7400
Washington DC 20233-7400 United States ESRI ArcCatalog 9.3.1.4000 File Geodatabase Feature Class Accurate against Federal Information Processing Standards (FIPS), FIPS Publication 6-4, and FIPS-55 at the 100% level for the codes and base names. The remaining attribute information has been examined but has not been fully tested for accuracy. The Census Bureau performed automated tests to ensure logical consistency and limits of shapefiles. Segments making up the outer and inner boundaries of a polygon tie end-to-end to completely enclose the area. All polygons are tested for closure. The Census Bureau uses its internally developed geographic update system to enhance and modify spatial and attribute data in the Census MAF/TIGER database. Standard geographic codes, such as FIPS codes for states, counties, municipalities, county subdivisions, places, American Indian/Alaska Native/Native Hawaiian areas, and congressional districts are used when encoding spatial entities. The Census Bureau performed spatial data tests for logical consistency of the codes during the compilation of the original Census MAF/TIGER database files. Most of the codes for geographic entities except states, counties, urban areas, Core Based Statistical Areas (CBSAs), American Indian Areas (AIAs), and congressional districts were provided to the Census Bureau by the USGS, the agency responsible for maintaining FIPS 55. Feature attribute information has been examined but has not been fully tested for consistency. For the TIGER/Line Shapefiles, the Point and Vector Object Count for the G-polygon SDTS Point and Vector Object Type reflects the number of records in the shapefile attribute table. For multi-polygon features, only one attribute record exists for each multi-polygon rather than one attribute record per individual G-polygon component of the multi-polygon feature. TIGER/Line Shapefile multi-polygons are an exception to the G-polygon object type classification. Therefore, when multi-polygons exist in a shapefile, the object count will be less than the actual number of G-polygons. Data completeness of the TIGER/Line Shapefiles reflects the contents of the Census MAF/TIGER database at the time the TIGER/Line Shapefiles were created. U.S. Department of Commerce, U.S. Census Bureau, Geography Division Unpublished material Census MAF/TIGER database online 201001 201007 publication date MAF/TIGER The selected geographic and cartographic information (line segments) are derived from the U.S. Census Bureau's Master Address File Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) database. TIGER/Line Shapefiles are extracted from the Census MAF/TIGER database by nation, state, county, and entity. Census MAF/TIGER data for all of the aforementioned geographic entities are then distributed among the shapefiles each containing attributes for line, polygon, or landmark geographic data. withheld 2010 Projected data to NC Stateplane meters, NAD83. 20110401 NC CGIA Physical
333 E. Six Forks Road
Raleigh North Carolina 27609 U.S.A. Mailing
20322 Mail Service Center
Raleigh North Carolina 27699 U.S.A. 919-754-6580 919-715-8551 dataq@its.nc.gov 8am to 5pm Phone and electronic mail preferred Metadata imported. withheld 20120604 13514300 Federal Information Processing Standards (FIPS), ANSI, and feature names. Vector Simple FALSE 0 TRUE FALSE coordinate pair 0.000328 0.000328 survey feet North American Datum of 1983 Geodetic Reference System 80 6378137.000000 298.257222 GCS_North_American_1983 NAD_1983_StatePlane_Kansas_South_FIPS_1502_Feet Explicit elevation coordinate included with horizontal coordinates 0.000100 OpportunityZones 2010 Census Census Tract State-based U.S. Census Bureau Feature Class 0 OBJECTID OBJECTID OID 4 10 0 Internal feature number. Esri Sequential unique whole numbers that are automatically generated. ZoneID ZoneID SmallInteger 2 5 0 Name Name String 50 0 0 SHAPE Shape Geometry 4 0 0 Feature geometry. ESRI Coordinates defining the features. Shape.STArea() Shape.STArea() Double 0 0 0 Shape.STLength() Shape.STLength() Double 0 0 0 NC Center for Geographic Information and Analysis Database Administration Physical
333 E. Six Forks Rd.
Raleigh North Carolina 27609 U.S.A. Mailing
20322 Mail Service Center
Raleigh North Carolina 27699 U.S.A. 919-754-6580 919-715-8551 dataq@its.nc.gov 8:30AM - 5:30PM Phone and electronic mail preferred ESRI shapefile (*.shp) withheld None. Download from www.nconemap.com is free of charge. Downloadable Data 20120606 North Carolina Center for Geographic Information and Analysis David Giordano Database Administration Physical
333 E. Six Forks Rd.
Raleigh North Carolina 27609 U.S.A. Mailing
20322 Mail Service Center
Raleigh North Carolina 27699 U.S.A. 919-754-6580 919-715-8551 dataq@its.nc.gov 8am to 5pm Phone and electronic mail preferred FGDC Content Standards for Digital Geospatial Metadata FGDC-STD-001-1998 local time None This metadata file is to accompany the dataset. NCCGIA does not support secondary distribution of this dataset without its current, compliant metadata record. If the dataset described in this metadata record was received from anyone besides NCCGIA, this metadata and the dataset it describes may contain discrepancies. en 20200804 07511500 FALSE 20210702 13041100 20210702 13041100 OpportunityZones 002 Projected GCS_North_American_1983 Linear Unit: Foot_US (0.304801) NAD_1983_StatePlane_Kansas_South_FIPS_1502_Feet <ProjectedCoordinateSystem xsi:type='typens:ProjectedCoordinateSystem' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns:xs='http://www.w3.org/2001/XMLSchema' xmlns:typens='http://www.esri.com/schemas/ArcGIS/10.5'><WKT>PROJCS[&quot;NAD_1983_StatePlane_Kansas_South_FIPS_1502_Feet&quot;,GEOGCS[&quot;GCS_North_American_1983&quot;,DATUM[&quot;D_North_American_1983&quot;,SPHEROID[&quot;GRS_1980&quot;,6378137.0,298.257222101]],PRIMEM[&quot;Greenwich&quot;,0.0],UNIT[&quot;Degree&quot;,0.0174532925199433]],PROJECTION[&quot;Lambert_Conformal_Conic&quot;],PARAMETER[&quot;False_Easting&quot;,1312333.333333333],PARAMETER[&quot;False_Northing&quot;,1312333.333333333],PARAMETER[&quot;Central_Meridian&quot;,-98.5],PARAMETER[&quot;Standard_Parallel_1&quot;,37.26666666666667],PARAMETER[&quot;Standard_Parallel_2&quot;,38.56666666666667],PARAMETER[&quot;Latitude_Of_Origin&quot;,36.66666666666666],UNIT[&quot;Foot_US&quot;,0.3048006096012192],AUTHORITY[&quot;EPSG&quot;,3420]]</WKT><XOrigin>-121025700</XOrigin><YOrigin>-93674900</YOrigin><XYScale>3048.0060960121928</XYScale><ZOrigin>0</ZOrigin><ZScale>1</ZScale><MOrigin>0</MOrigin><MScale>1</MScale><XYTolerance>0.01</XYTolerance><ZTolerance>0.01</ZTolerance><MTolerance>0.01</MTolerance><HighPrecision>true</HighPrecision><WKID>102678</WKID><LatestWKID>3420</LatestWKID></ProjectedCoordinateSystem> 1.0 Version 6.2 (Build 9200) ; Esri ArcGIS 10.5.1.7333 OpportunityZones 1512498.646866 1703120.255451 1768863.293522 1607114.75908 1 -97.810242 -97.145342 37.918402 37.468483 1 ISO 19115 Geographic Information - Metadata DIS_ESRI1.0 dataset 002 withheld Local Area Network File Geodatabase Feature Class Feature Class NAD_1983_StatePlane_Kansas_South_FIPS_1502_Feet EPSG 8.2.10(9.3.0.0) 0 20210702